Medical image display with resolution of 6 mega sub-pixels for advanced image quality
TOTOKU introduces the new, affordable MS21i2, a unique display that achieves 6M ISD resolution, utilizing a 2MP panel and our unique subpixel-drive technology. By utilizing our revolutionary subpixel drive technology, the MS21i2 provides comparatively the same resolution as a 6 MP display, without the extra costs typically associated with higher resolution displays.
To display an overall image whose native resolution is higher than the monitor is able to reproduce, the image is converted to a lower resolution image with a certain amount of data
The MS21i2 with high resolution offers excellent image reproduction, faithful to the original captured by the modality device with less image degradation
High resolution of 6M sub-pixels realized by ISD
Faithful Reproduction of Image Details
While a pixel pitch of 2MP display is 270µm, MS21i2 achieves 90µm in sub-pixel chain direction by newly developed ISD technology to realize excellent depiction of image details.
ISD (Independent Sub-pixel Drive)
Driven by each sub-pixel value corresponding to detailed information recorded in an original image, three times resolution enhancement is achieved. (Patent pending) In addition, up to 1276 shades of gray are now simultaneously displayable by the upgraded ISD technology.
Special AR Coating for Film-like Black and Improved Sharpness
TOTOKU’s new special AR coating technology addresses properties of focus, noise reduction, contrast, and viewing angle achieving film-like black and accurate reproduction of images. (Patent pending)
Simultaneous display of 1276 shades of gray
Realizes smoother grayscale display required for medical image displays
New luminance stabilizing system λ-Sentinel II
λ-Sentinel II consists of a luminance sensor and luminance control circuit. The luminance sensor, integrated into the front bezel, consistently monitors and accurately stabilizes luminance on the screen by rapidly communicating with the backlight sensor.
In addition, a build-in luminance sensor provided with i2 models enables even simpler calibration without attaching the calibration sensor.
Remote grayscale check and remote calibration functions
Conformance testing to DICOM GSDF and calibration can be remotely accomplished. These features minimize the burden on display administrators.
* Optional PM Medivisor software is required.
Luminance equalizer λ-Uniformity Congruence
Is built in to achieve highly accurate luminance uniformity across the screen. Luminance unevenness is minimized in the final tune-up prior to shipping.
* Images shown are for illustrative purposes only.
Calibrates luminance and gamma to enable smooth grayscale display that is faithful to DICOM GSDF.
* Optional calibration kit is required.
Hardware pivot function for fast drawing in portrait on landscape orientation
Stress-free operation is made possible by the fast drawing speed even in portrait orientation.
OSD Information Display
With a push of a button, the display’s current status can be checked such as the display model, total operating time, actual measurement of luminance, and calibration settings.
LED indicator to inform of current status
A glance at the LED indicator tells you the display’s current operating status.
Enhanced convenience with utility software:
The backlight dims as the screensaver starts, reducing power consumption and preventing unnecessary deterioration of the backlight. * This feature may not be available, depending on the specifications of the graphics card used. Gamma check
18 points of luminance values are measured and plotted into a graph. Ambient light and display luminance measurement
The built-in sensors measure display luminance and ambient illuminance
Pairing service to match colors of two displays (Optional)
Worldwide medical safety standards
This display is certified under various medical safety standards that are much more demanding than those for general-purpose IT equipment.