5MP 21.3″ Digital Mammography Display
Super High Resolution Display for Mammography(Optional: Independent Subpixel Drive Technology)
Totoku Introduces the MS55i2 equipped with Independent Sub pixel Drive(ISD) Technology to accept higher resolution output from modality devices as a major breakthrough.
Luminance equilizer λ-Uniformity Congruance
Is build to achieve highly accurate luminance uniformity across the screen.Luminance unevenness is minimized in the final tune-up prior to shipping.*Customized view software and graphics card are required for 10-bit Images
Calibration Luminance and gamma to enable smooth grayscale display that is faithful to DICOM GSDF(optional calibration kit is required)
Simultaneous display of 1276 shades of gray
Realizes smoother grayscale display required for medical image displays.
Hardware pivot function
Stress-free operation is made possible by fast drawing speed for on-the-fly change to portrait orientation.
High luminance, high contrast and wide viewing angle
With the highest-in-class luminance and contrast and a wide viewing angle, JVCKenwood’s LCD drive technology maximizes the display’s performance for the best image quality.
Dual link input
Provides smooth display for motion pictures..
OSD information display
With a push of a button, the display’s current status can be checked, such as the displays model, total operating time, actual measurement of luminance, and calibration setting.
A glass at the LED indicator tells you the display’s current operating
Enhanced convenience with utility software
Utility software offers enhanced features such as gamma check, ambient light and display luminance measurement, and advanced power saving to reduce power consumption and prevent unnecessary deterioration of the
Luminance stabilizing system λ-Sentinel II
The luminance sensor, integrated into the front bezel, consistently monitors and accurately stabilizes luminance on the screen by rapidly communicating with the backlight sensor. In addition, a built-in luminance sensor provided with i2 models, enables even simpler calibration without attaching the calibration sensor.
Remote grayscale check and remote calibration functions
Conformance testing to DICOM GSDF and calibration can be remotely accomplished. These features minimize the burden on display administrators (optional PM Medivisor software is required).
Worldwide medical safety standards
This display is certified under various medical safety standards that are much more demanding than those for general-purpose IT equipment.
Paring service to match colors of two displays(optional)
Medical imaging often uses two displays side-by-side, and its very important that they present the same color temperature. JVCKenwood offers a display pairing service that matches colors of two displays using a high-definition spectrophotometer before shipping. (Consult your dealer for more information about the pairing service.)
|LCD||Technology||21.3-inch, Monochrome, TFT active matrix IPS Technology|
|Display Area||422.4mm x 337.9mm|
|Pixel Pitch||0.165mm x 0.165mm|
|Visual Perfomance||Contrast Ratio||1200:1 (typ)|
|Maximum Luminance||1200cd/m² (typ), (calibrated to 410cd/m² and 500cd/² by factory default)|
|Viewing Angle||176° horizontal and vertical (typ)|
|Native Resolution||2048 X 2560, Independent Sub pixel Drive ON: 2048 X 7680 (Sub pixel)|
|GrayScale||256 shades of gray out of 12277 shades of gray.
1024 shades of gray (DisplayPort 10bit input)
Simultaneous display of 2048 shades of gray (Independent Sub pixel Drive
ON:1276 shades of gray) are possible with the customized viewer.
|Input Signal||Input Sync Signal||DVI-D (DVI 1.0 compliant)DisplayPort (DisplayPort 1.1a compliant)|
|Plug and Play||DDC2B compliant|
|Input Power Supply||Input||100V ~ 240V 50/60HZ|
|Maximum Power Consumption||80W typ. (with power management feature)|
|Features||Calibration Control||Luminance, Gamma, Capability of saving 3 sets of LUT settings(An optional calibration kit is required.)|
|OSD Information Display||Model name, Serial No., Total operating time, Calibration settings (Operating time from Last Calibration, Luminance, Gamma, etc.), Current luminance, etc.|
|USB Hub||USB Rev. 2.0 compliant, Self-powered USB upstream connector (x1), USB downstream connector (x2)|
|Other Features||Luminance Uniformity Correction, Hardware Pivot, LED indicator, Advanced power saving, Configurations switching function, Independent Sub pixel Drive Technology, DICOM conformance self-testing function|
|Standards||ANSI/AAMI ES60601-1(2005), CAN/CSA C22.2 NO. 60601-1(2008),CE(EN60601-1, EN60601-1-2), FCC Part15, subpart B Class B, VCCI class B,
ICES-3(B), FDA510(k), J-Moss, RoHS
|Physical Characteristics||Dimension(Incl. tilt stand)||Landscape : 474.5 (W) X 479.9 / 541.4 (H) X 220 (D)mm Portrait : 390 (W) X 522.2 / 583.7 (H) X 220 (D)mm|
|Weight||Net: approx. 13kg|
|Tilt Stand||Tilt, Swivel, Portrait / Landscape|
|Mount||100mm VESA compliant|
|Security Slot||On the back of the panel and the tilt stand|
|Accessories||Power cord (3P), DVI cable, DisplayPort cable, USB cable, Operation manual
*Cleaning kit (Special AR coating model only)