5MP with ISD Technology 21.3" Digital Mammography Display
Super High Resolution Display for Mammography
As imaging technology advances, modality devices are reproducing such high resolution that even current 5MP displays are unable to reproduce, creating a bottleneck in softcopy diagnostic environment. TOTOKU introduces "MS51i2" equipped with ISD
(Independent Sub-pixels Drive) technology* to accept higher resolution output from modality devices as a major breakthrough.
Super-high 15 mega pixels resolution with a pixel pitch of 55 µm
Faithful Reproduction of Image Details
While a pixel pitch of 5MP displays is 165µm, MS51i2 achieves 55µm in sub pixel chain direction by newly developed ISD technology to realize excellent depiction of image details.
Advanced Image Quality with Less Degradation
To display an overall image whose native resolution is higher than the monitor is able to reproduce, the image is converted to a lower resolution image with a certain amount of data loss. The MS51i2 with super high resolution of 15 mega pixels, offers excellent image reproduction, faithful to the original captured by the modality device without image degradation.
ISD (Independent Sub-pixel Drive)
Driven each sub-pixel value corresponding to detailed information recorded in an original image, three times resolution enhancement is achieved. (Patent pending)
Special AR Coating for Film-like Black and Improved Sharpness
TOTOKU's new special AR coating technology addresses properties of focus, noise reduction, contrast, and viewing angle achieving film-like black and accurate reproduction of images
New luminance stabilizing system λ-Sentinel II
λ-Sentinel II consists of a luminance sensor and luminance control circuit. The luminance sensor, integrated into the front bezel, consistently monitors and accurately stabilizes luminance on the screen by rapidly communicating with the backlight sensor
Remote grayscale check and remote calibration functions
Conformance testing to DICOM GSDF and calibration can be remotely accomplished. These features minimize the burden on display administrators.
* Optional PM Medivisor software is required.
Luminance equalizer λ-Uniformity Congruence
Is built in to achieve highly accurate luminance uniformity across the screen. Luminance unevenness is minimized in the final tune-up prior to shipping.
* Images shown are for illustrative purposes only.
Calibration function
Calibrates luminance and gamma to enable smooth grayscale display that is faithful to DICOM GSDF.
* Optional calibration kit is required
Hardware pivot function for fast drawing in portrait on landscape orientation
Stress-free operation is made possible by fast drawing speed for on-the-fly change to portrait.
Dual Link input
provides smooth display of motion pictures
OSD Information Display
With a push of a button, the display's current status can be checked such as the display model, total operating time, actual measurement of luminance, and calibration settings.
LED indicator to inform of current status
A glance at the LED indicator tells you the display's current operating status.
Enhanced convenience with utility software:
The backlight dims as the screensaver starts, reducing power consumption and preventing unnecessary deterioration of the backlight.
* This feature may not be available, depending on the specifications of the graphics card used.
Gamma check
18 points of luminance values are measured and plotted into a graph.
Ambient light and display luminance measurement
The built-in sensors measure display luminance and ambient illuminance
Worldwide medical safety standards
This display is certified under various medical safety standards that are much more demanding than those for general-purpose IT equipment
Model name
MS51i2
LCD
Technology
21.3-inch, Monochrome, TFT active matrix IPS Technology
Display Area
422.4 mm x 337.9 mm
Pixel Pitch
0.165 mm x 0.165 mm
Visual Perfomance
Contrast Ratio
800:1 (typ)
Maximum Luminance
750 cd/m² (typ), (calibrated to 410 cd/m² and 500 cd/m² by factory default)
Viewing Angle
170 °
Available Resolution
640 x 480 (VGA), 2048 x 7680 (2560 x 3), 7680 (2560 x 3) x 2048
Grayscale Display
10bit (1021 shades of gray) to 256 shades of gray
Input Signal
Input Sync Signal
DVI 1.0 compliant
Plug and Play
DDC2B compliant
Input Power Supply
Input
AC Adapter 100V-240V (±10%) 50/60Hz
Maximum Power Consumption
80W (typ), (with power management feature)
Features
Calibration Control
Luminance, Gamma, Capability of saving 3 sets of LUT settings (An optional calibration kit is required.)
OSD Information Display
Model name, Serial No., Total operating time, Calibration settings (Operating time from Last Calibration, Luminance, Gamma, etc.), Current luminance, etc.
USB Hub
USB Rev. 2.0 compliant, Self-powered
Other Features
Luminance Uniformity Correction Function, Hardware Pivot function, LED indicator
Faithful Reproduction of Image Details 
λ-Sentinel II consists of a luminance sensor and luminance control circuit. The luminance sensor, integrated into the front bezel, consistently monitors and accurately stabilizes luminance on the screen by rapidly communicating with the backlight sensor
Conformance testing to DICOM GSDF and calibration can be remotely accomplished. These features minimize the burden on display administrators.
* Optional PM Medivisor software is required.
Is built in to achieve highly accurate luminance uniformity across the screen. Luminance unevenness is minimized in the final tune-up prior to shipping.
* Images shown are for illustrative purposes only.
Calibrates luminance and gamma to enable smooth grayscale display that is faithful to DICOM GSDF.
* Optional calibration kit is required
With a push of a button, the display's current status can be checked such as the display model, total operating time, actual measurement of luminance, and calibration settings.
A glance at the LED indicator tells you the display's current operating status.
This display is certified under various medical safety standards that are much more demanding than those for general-purpose IT equipment
